HVAC Condenser Mounts
Condenser Mount Range supporting up to 1200kg
Aluminium, Modular, Quick to install, Fully adjustable & Compliant HVAC Mounts, supporting up to 1200kg!
Our Condenser Mounts are provided as a boxed kit-set, including the specialised Monkeytoe mounting clips and fixings to ensure loads are transferred to the roof structure and not applied to the roof sheeting.
This pre-engineered solution is compatable with most roofing types and is designed to support a wide variety of Heating, Ventilation, Air Conditioning and Refrigeration units.
Our Benefits
- Eliminate non-compliant fixing and mounting methods
- Fast installation times
- Lightweight boxed kitsets
- Fully engineered
- Off-the-shelf availability
- 25 Year Warranty
- Modular & adjustable assembly
- Supplied with state-specific compliance & engineering certification.
- Compatible with roofing warranties.
What to order
Where to buy
DOWNLOADS
COMPLIANCE
WIND REGIONS
WARRANTY FORM
Condenser Mount – Up to 120kg
CM01
$275
excl. GST & freight
Condenser Mount – Up to 200kg
CM02
$330
excl. GST & freight
Condenser Mount – Up to 300kg
CM03
$385
excl. GST & freight
Condenser Mount – Up to 500kg
CM05
$990
excl. GST & freight
Condenser Mount – Up to 1000kg
CM10
$1,950
excl. GST & freight
Install Tool – Roof Mounted Models
$65
excl. GST & freight
Condenser Wall Mount – Up to 100kg
CW100.500
$95
excl. GST & freight
Condenser Wall Mount – Up to 200kg
CW200.600
$120
excl. GST & freight
Unit Stacker Mount – Up to 120kg
CS025.1
$600
excl. GST & freight
Unit Stacker Mount – Up to 150kg
CS025.2
$800
excl. GST & freight
Unit Stacker Mount – Up to 300kg
CS025.3
$950
excl. GST & freight
Condenser Mount Platform – Up to 1000kg
CM10P
$4,400
excl. GST & freight
Condenser Mount Platform – Up to 1200kg
CM12P
$6,600
excl. GST & freight
Available at our stockists nation-wide.
FAQ’S
What are the advantages of having Mesh Platform over a Skeletal Platform?
A Mesh Platform provides the service personnel a service area, further enhancing the protection of your roof. It means the servicemen are working on the same level as the mechanical units, making it easier to service. It is also safer as they are working on a level area rather than standing on the slope of the roof.
Does Monkeytoe cover the Engineering of Plant Platforms?
Yes. All platforms have either generic design or are designed as job/project specific.
Does Monkeytoe cover the Engineering of Plant Platforms?
Generally, the platform induced lateral loads can be transferred to braced walls/portal frames/shear walls through roof diaphragm actions by the roof sheeting or other forms of diaphragms such as plywood. In the case where the diaphragm is absent or inadequate, the lateral load transfer can be achieved through axial tension/compression actions of the purlin in the along direction and through out of plane bending and shear in the across direction. In this case the client’s structural engineer is required to carry out this check. Monkey Toe can assist with this if required.
WIND REGIONS
As this is an important factor in our system designs, our design and engineering team will ensure your structure meets the standard required for the region where it is installed.
See map below for wind regions of Australia
* Region C – Cyclonic
* Region D – Severe Cyclonic
* Ultimate wind speeds as outlined in Australia New Zealand 1170.2:2011 (R2016) Structural design actions – Wind actions.
* Design wind speed is calculated using specific design criteria (Terrain category, importance level etc.) related to your site requirements
Kirby Darwin
ACD Trade Darwin
Kirby Alice Springs
Kirby Canberra
Beijer Ref Canningvale
Beijer Ref Perth
ACD Trade Perth North
Kirby Gnangara
Kirby Jandakot
Kirby Osborne Park
Kirby Hobart
Kirby Launceston
Beijer Ref Adelaide
Kirby Brompton
Kirby Lonsdale
Kirby Wingfield
Kirby Port Lincoln
Kirby Mt. Gambier
Kirby Dandenong South
Beijer Ref Bendigo
Beijer Ref Clayton
Beijer Ref Thomastown
Beijer Ref West Melbourne
Kirby Geelong West
Kirby West Melbourne
Kirby Bayswater
Kirby Moorabbin
Kirby Preston
Kirby Sunshine West
Kirby Traralgon
Kirby Shepparton
Kirby Mildura
Kirby Tuggerah
Kirby Preston
Kirby Padstow
Kirby Wollongong
Kirby Newcastle
Kirby Coffs Harbour
Beijer Ref Bankstown
Beijer Ref Auburn
Beijer Ref Campbelltown
Beijer Ref Albury
Kirby Alexandria
Kirby Artarmon
Kirby Bankstown Flagship Store
Kirby Brookvale
Kirby Port Macquarie
Kirby Burleigh Heads
Kirby Gold Coast
Kirby Underwood
Kirby Moorooka
Kirby Murarrie
Kirby Bowen Hills
Kirby Brendale
Kirby Northlakes
Kirby Maroochydore
Kirby Bundaberg
Kirby Rockhampton
Kirby Mackay
Kirby Townsville
Kirby Cairns
Kirby Launceston
Kirby Dubbo
Kirby Tamworth
Beijer Ref Rockhampton
Beijer Ref Southport
Beijer Ref Archerfield
Beijer Ref Geebung
Beijer Ref Gladstone
Beijer Ref Toowoomba
Beijer Ref Adelaide
Allair Duct and Fittings - Brisbane
Allair Duct and Fittings - Sunshine Coast
CONDENSER MOUNT DOWNLOADS
PRODUCT CATALOGUE (PDF)
SPEC SHEETS (PDF)
INSTALL PROCEDURE (PDF)
ENGINEERING CERTIFICATES (PDF)
IFC & RFA FILES
Security Covers
COMPLIANCE
The only compliant ‘Off the shelf’ Condenser Mount in Australia.
Fully engineered including Wind & Seismic loading to AS/NZS-1170.0, 1170.1, 1170.2, 1170.4 & 1170.5
