Our fully adjustable aluminium roof mounting system supports AC condenser units of up to 500kg.
Boxed kitset and ready to install, our raised air conditioner condenser platform mounting system uses Monkeytoe’s specialised mounting clips and fixings to ensure loads are taken down to the roof structure, not applied to the roof itself. Suitable for a variety of condenser, air conditioner, air handler and mechanical mountings, the system can be mounted on most roof types. It can also be expanded for multi-bank units, which provide a cost effective and clean appearance and combined with our roof plant screening.
NOTE: Configurations could take up to three minutes to load fully depending on the size & complexity as it is configured in real-time based on requirements.
This system is built in accordance with structural design actions B1, AS/NZS 1170 Standards Australia / New Zealand, and Aluminium Structures, Part 1: Limit State Design AS/NZS 1664.1 Standards Australia / New Zealand NZS/AS 1657.
Frequently Asked Questions
What is the maximum weight that your condenser mounting system can support?
The standard units are 0-80kg, HD are 80-150kg and the super HDs can support up to 300-500kg depending on the roof pitch and the actual physical dimensions [please ask the MKT consultants for a special design].
What do we need to know to order a Condenser Mount?
The following detail is required:
How many condensers do you have to mount?
- Approx. weight of Condenser Unit
- Roof profile type (so we can provide you with the correct fixing type)
- Purlin spacings (our mounts span from purlin to purlin)
- Roof Pitch (we’ll make sure your Mount has enough adjustment so that the condenser will sit level, i.e. won’t be on the same angle as the roof).
I worked with Monkeytoe at HMAS Cerberus to design and install 4 x mechanical plant decks. From design to the install onsite under strict defence guidelines nothing was a problem and the process was made easy by there willingness to achieve whatever was required to produce the best outcome. Even a design change mid assembly didn’t faze the onsite team that achieved a fantastic finished product that was better then expected given the install locations. I look forward to working with Monkeytoe in the future.
Joel Cowie
Icon Construction
Monkeytoe was very professional and helpful from the onset. They have an impressive range of designs for roof access and it’s obvious why they are leaders in the industry.
Divan Pretorius
McMillan & Lockwood
Monkeytoe were engaged to supply us with an alternative to our traditional structural steel rooftop mechanical plant platform.
The design utilising strong and lightweight materials is a great advantage. The seamless interface of their supports with our traditional structural steel roof beams works perfectly.
An all-in-one package complete with deck structure, mesh and sound wall, had a positive affect to the program that was a great bonus for the construction team. Monkeytoe did it all with great efficiency and speed, saving construction costs and time to our overall program. All components arrived from New Zealand on time and in good condition (even with the added complications of Covid-19!). Initial assembly was done in the carpark of the site and then easily craned into position on the roof.
The Monkeytoe team in New Zealand and here in Australia were efficient, easy to work with and a pleasure to deal with. We are more than proud to have the first of your systems, on our site, in Australia.
Platform Deck was supplied, and installed as per our expectations and designed in a manner as to accommodate extra support underneath larger plant units. Some extra supports were required as the units had to be adjusted in position onsite therefore causing some minor point load issues, however Monkeytoe were more than helpful to supply the additional supports despite it being the fault of another contractor.
In our opinion and also in the opinion of our acoustic engineer, the finish quality of the plant deck and especially the acoustic screening was standout. The acoustic engineer was impressed with the design and also quality of finishing and said it was some of the best he has seen. In early days we did have some concerns as to how the platform would be fixed through the kingspan roofing however the mounting clips worked perfectly.
Exceptional quality and exceptional administration service!
Originally the HVAC for Target road was designed across 4 platforms with numerous walkways for serviceability. However after a rethink and redesign a single platform was proposed and after discussions with Monkeytoe Xbeam was suggested as a solution. The advantages for our client have been the reduction of walkways, the ability to add an additional Air Con unit for future proofing and the reduction in structural upgrade with Xbeam supported from portal frames.
Brian Johns
RCG
The absorptive nature of the HushMonkey Acoustic Panel delivers superior performance over a standard barrier system, with more sound being absorbed within the enclosure, significantly reducing noise emissions to the surrounding environment.
Tim Beresford | Kanvin Chen
Norman Disney & Young
We have provided a safer, more accessible access method for our staff by using the Monkeytoe access solution.
Vitaco’s requirement for a 70m long elevated walkway was quickly understood by MonkeyToe and we were given 3D designs to review. MonkeyToe’s engineers worked closely with our architects and engineers to produce a final design. We’ve been kept well informed throughout the project and the result is an impressive looking walkway, which is rock solid, a critical factor as it’s 7m above the warehouse floor and used by 50 staff everyday.
NOTE: Configurations could take up to three minutes to load fully depending on the size & complexity as it is configured in real-time based on requirements.